Sifat Fisik dan Keawetan Kayu Cemara Gunung (Casuarina junghuniana) di Pegunungan Bromo Kabupaten Probolinggo

Physical Characteristics and Durability of Cemara Gunung Wood (Casuarina junghuniana) in Mt. Bromo Probolinggo

  • Galit Gatut Prakosa Universitas Muhammadiyah Malang
  • Tatag Muttaqin Universitas Muhammadiyah Malang
  • Harjoko Harjoko Universitas Muhammadiyah Malang
Keywords: Cemara Gunung, Sifat fisik, Keawetan

Abstract

Physical Characteristics and Durability of Cemara Gunung Wood (Casuarina junghuniana) in the Mt. Bromo Probolinggo. The purpose of this study is to find out the physical characteristics of Cemara Gunung wood and to know the durability of Cemara Gunung wood toward termite. The using methods knew the water content, density, and the development of wood thickness. Meanwhile, the selecting of wood durability test without the picking of using soil termites (Macrotermes gilvus) against the three wood samples by using (SNI) 01-7207-2014 regarding the durability of wood test towards wood-destroying organisms. The deriving results showed that the moisture content of the sapwood portion was more significant than the heartwood, based upon the highest density test on the heartwood, which was 1.24 g/cm3, the density of sapwood I and sapwood II was almost equal to 0.81-0, 82g/cm3. The higher the density value, the stronger the wood. The full development is directly proportional to density, the total development value of the two treatments is not too high due to hard Cemara Gunung wood. Based on the termite test showed the average weight reduction in the wood core test sample <3.52% (very resistant) class I. For testing sapwood, I and sapwood II (preservative) were not much different because it was included in the privileged class (3, 52-7,50) (class II). From the three trials of termite in bottles, the 15-day test (the bottle I) was the most effective followed by bottle II and bottle III.

Downloads

Download data is not yet available.

Author Biographies

Galit Gatut Prakosa, Universitas Muhammadiyah Malang

Forestry Department

Universitas Muhammadiyah Malang

Tatag Muttaqin, Universitas Muhammadiyah Malang

Forestry Department

Universitas Muhammadiyah Malang

Harjoko Harjoko, Universitas Muhammadiyah Malang

Forestry Department

Universitas Muhammadiyah Malang

References

Arinana, Simamora L, Tsunoda K, Hadi YS, Herliyana EN. 2010. Comparison of Indonesian and Japanese Standardized Test Using Subterranean Termitesin the Laboratory. IWoRS 2010:603.
Bowyer J.L., Shmulsky R., and Haygreen J.G. 2003. Forest Products and Wood Science An Introduction Fourth Edition. IOWA (US): IOWA State University Pr.
Departemen ESDM. 2005. Blueprint Pengelolaan Energi Nasional 2005 – 2025. Jakarta.
Dwianto W. dan Marsoem S.N. 2008. Tinjauan Hasil- Hasil Faktor-faktor Alam Yang Mempengaruhi Sifat Fisik dan Mekanik Kayu Indonesia. Journal Tropical Wood Science and Technology. 6(2): 85-100.
Kasmudjo. 2010. Teknologi Hasil Hutan. Cakrawala Media. Yogyakarta.
Kementrian Perindustrian. 2013. Kebutuhan Kayu Bulat 2003 – 2013. Jakarta (ID): Direktorat Jenderal Industri Agro.
Kuswantoro DP. 2005. Keawetan, deteriorisasi, dan pengawetan kayu rakyat. AlBasia 2(1): 48-55.
Lempang, M. 2014. Sifat Dasar dan Potensi Kegunaan Jabon Merah. Jurnal Penelitian Kehutanan Wallacea. (2):163- 175.
Purwaningsih E.D. 2014. Laporan Akhir Ilmu Kayu. Program Studi Kehutanan. Universitas Mataram.
Siarudin, M. dan S. N. Marsoem. 2007. Karakteristik Dan Variasi Sifat Fisik Kayu Mangium (Acacia mangium Willd.) Pada Beberapa Jarak Tanam Dan Kedudukan Aksial-Radial. Jurnal Pemuliaan Tanaman Hutan, 1(1):1-11.
Published
2018-12-16
How to Cite
Gatut Prakosa, G., Muttaqin, T., & Harjoko, H. (2018). Sifat Fisik dan Keawetan Kayu Cemara Gunung (Casuarina junghuniana) di Pegunungan Bromo Kabupaten Probolinggo. Daun: Jurnal Ilmiah Pertanian Dan Kehutanan, 5(2), 71-82. https://doi.org/10.33084/daun.v5i2.463