Pembentukan Komunitas Masyarakat Pembuat Media Tanam dari Sampah Plastik Kresek

Establishment of a Community in the Making of Planting Media from Crackle Plastic Waste

Authors

  • Wiwit Probowati Universitas Aisyiyah Yogyakarta
  • Ika Afifah Nugraheni Universitas ‘Aisyiyah Yogyakarta
  • Suryadi Suryadi Sayidan Agro Media

DOI:

https://doi.org/10.33084/pengabdianmu.v5i2.1067

Keywords:

Community, Plant media, Rubbish, Plastic bag

Abstract

The focus of the community service program is the formation of communities that are committed to processing plastic rubbish materials into planting media (mediokres). Mediokres is a product of Sayidan Agro Media’s organizational innovation in Sleman, D.I. Yogyakarta, which is able to utilize plastic bag rubbish at the Final Disposal Site becomes a planting medium to replace soil. Mediokres has been widely marketed in Indonesia However, in the production process of mediokres, there is the obstacle, one of which is the supply of mediokres products which is slow compared to the large consumer demand. Therefore the formed mediokres community is able to help meet the mediokres stock both for ordering and stocking every month. So that consumer demand is fulfilled.

Downloads

Download data is not yet available.

References

Alqa, A.S.F., Zuliantoni, Z., Gunawan, A. 2018. Pengolahan Limbah Plastik Berbasis Mitra Berkegiatan Lingkungan. Jurnal Pengabdi. 1(2):77-85. http://dx.doi.org/10.26418/jplp2km.v1i2.29906
Karuniastuti, N. 2013. Bahaya Plastik Terhadap Kesehatan Dan Lingkungan. Swara Patra: Majalah Ilmiah PPSDM Migas. 3(1):6-14.
Probowati, W., Isworo, A. 2019. Nilai Ta’awun dari Sampah. Suara Muhammadiyah. https://www.suaramuhammadiyah.id/2019/01/29/nilai-taawun-dari-sampah/
Purwaningrum, P. 2016. Upaya Mengurangi Timbulan Sampah Plastik Di Lingkungan. Indonesian Journal of Urban and Environmental Technology. 8(2):141-147. http://dx.doi.org/10.25105/urbanenvirotech.v8i2.1421
Sahwan, F.L., Martono, D.H., Wahyono, S., Wisoyodharmo, L.A. 2005. Sistem Pengolahan Limbah Plastik di Indonesia. Jurnal Teknologi Lingkungan. 6(1):311-318. https://doi.org/10.29122/jtl.v6i1.330
Sarker, M., Rashid, M.M., Rahman, M.S., Molla, M. 2012. Environmentally Harmful Low Density Waste Plastic Conversion into Kerosene Grade Fuel. Journal of Environmental Protection. 3(8):700-708. http://dx.doi.org/10.4236/jep.2012.38083
Setiawan, B., Fitrah, D.S. 2018. Kampanye Gerakan Indonesia Diet Kantong Plastik Dalam Membentuk Persepsi Masyarakat Bandung. Jurnal Manajemen Komunikasi. 2(2):102-117. https://doi.org/10.24198/jmk.v2i2.12909
Siregar, C.N. 2014. Partisipasi Masyarakat Dan Nelayan Dalam Mengurangi Pencemaran Air Laut Di Kawasan Pantai Manado-Sulawesi Utara. Jurnal Sosioteknologi. 13(1):25-33. http://dx.doi.org/10.5614/sostek.itbj.2014.13.1.3
Tubnonghee, R., Sanongraj, S., Sanongraj, W. 2010. Comparative Characteristics of Derived Plastic Oil and Commercial Diesel Oil. In Proceeding of the 8th Asian-Pacific Regional Conference on Practical Environmental Technologies (APRC2010). Thailand, Ubonratchathani: Ubon Ratchathani University.
Winarti, P., Azizah, A. 2016. Penyuluhan Pengelolaan Sampah Plastik Dengan Konsep Zero Waste Bagi Ibu Rumah Tangga Dikecamatan Bergas Kabupaten Semarang. E-Dimas: Jurnal Pengabdian kepada Masyarakat. 7(1):60-67. http://dx.doi.org/10.26877/e-dimas.v7i1.1039

Downloads

Published

2020-03-30

How to Cite

Probowati, W., Nugraheni, I. A., & Suryadi, S. (2020). Pembentukan Komunitas Masyarakat Pembuat Media Tanam dari Sampah Plastik Kresek: Establishment of a Community in the Making of Planting Media from Crackle Plastic Waste. PengabdianMu: Jurnal Ilmiah Pengabdian Kepada Masyarakat, 5(2), 154–161. https://doi.org/10.33084/pengabdianmu.v5i2.1067

Issue

Vol. 5 No. 2 (2020): PengabdianMu: Jurnal Ilmiah Pengabdian kepada Masyarakat

Section

Articles

License

Authors who publish with this journal agree to the following terms:

  1. Any article on the copyright is retained by the author(s).
  2. Author grant the journal, right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share work with acknowledgment of the work authors and initial publications in this journal.
  3. Authors are able to enter into a separate, additional contractual arrangements for non-exclusive distribution of published articles of work (eg, post-institutional repository) or publish it in a book, with acknowledgment of its initial publication in this journal.
  4. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their websites) prior to and during the submission process, as can lead to productive exchanges, as well as earlier and greater citation of published work.
  5. The article and any associated published material is distributed under the Creative Commons Attribution-ShareAlike 4.0 International License